Editing Yoosee SD-M5 (section)

=== Cannot connect to doorbell ===

'''Symtoms '''

Android Yoosee app reports that the doorbell is not available.


''' Diagnostics '''

* Confirm the Ethernet cable is carrying data.
** Plug one end into the switch where the PoE was plugged.
** Plug the other end of the ethernet calbe (the one in the doorframe) into a laptop. 
** Turn off wifi on the laptop.
** Confirm that the laptop can reach the router. 
* Confirm that the doorbell is working. 
** Remove the doorbell from the doorframe.
** Plug a different shorter Cat6 cable into the PoE injector.
** Plug the other end of the new cable into the doorbell (closer to the router).
** Confirm that the doorbell gets power and can be seen by the Android Yoosee app.