Editing WIFI Doorbell Camera Push Notifications (section)

== DS Cam app configuration ==

* Log into '''Surveillance Station'''
* Click '''Main Menu''' (the icon with the four blocks at the upper left of the page) 

=== Notifications panel ===

* '''Push Service''' tab
** '''Enable mobile device notifications''': checked
** Click '''Manage paired DS Cam''' and confirm that the expected phones are displayed.
** Click '''Manage paired DS Finder''' and confirm that the expected phone are displayed.
** Click '''Send test message''' to confirm that the phones are paired and able to receive notifications from '''Surveillance Station'''.
* '''Rules''' tab
** Make sure the relevant events are checked under the '''Mobile''' column, e.g. '''Camera > Motion Detected''', '''Camera > Intercom - Doorbell event detected'''
* '''Advanced''' tab
** Not sure if these settings are critical to receiving push notifications or not. 
** '''DSM Notification''' > '''Show DSM Notifications...''': checked
** '''Mobile Notifications''' > '''Notifications for non-admin users''': Camera and device events only

=== Home Mode panel ===

'''Home Mode''' controls notifications being issued depending on a mobile device's location. 

* '''Overview'''
** '''Status''': On
** Click '''Show Map''' to confirm the location and size of the geofence.
** Click '''Set Location''' if necessary.
* '''Settings'''
** '''Notification''' tab
*** Click the relevant events in the '''Mobile''' column, e.g. '''Motion detection'''.

=== Doorbell events ===

Doorbell events are not captured when using [ONVIF] as the brand in Surveillance Station.

=== Motion detection ===

* '''Surveillance Station''' > '''IP Camera''' > ''(choose camera)'' > '''Edit''' > '''Event Detection'''