Editing Yoosee SD-M5 (section)

== Configuration ==

=== Bluetooth doorbell chime ===

* Make sure that the doorbell has power and is connected to the router.
* Press the '''Volume''' button of the chime and release once the light comes on.
* Press the '''Call''' button doorbell (the one with the bell on it). The light on the chime should flash once.
* Press the '''Call''' button on the doorbell again. The light on the chime should flash several times. This indicates that the devices are paired.

=== Block doorbell from WAN ===

==== TP-Link Archer C9 wifi router ====

Log into router admin. 

* '''Advanced''' tab
* '''Access Control''' > '''Rule'''
** '''Default Filter Policy''': Deny the packets specified...to pass through the router
** '''Add Rule'''
*** '''Host'''
**** '''Host Description''': Yoosee Doorbell
**** '''Mode''': Mac Address
**** '''Mac Address''': [[Viewing The Device Names on a LAN|Obtain and enter Mac address of Yoosee SD-M5]]
*** '''Rule''' > '''Add New...'''
**** '''Target''': Any
**** '''Schedule''': Permanent
**** '''Status''': On

New access control rules require a reboot of the router to take effect.

<p class="alert alert-warning">This works, but it prevents the mobile apps from connecting to the doorbell.</p>

=== Synology Surveillance Station ===

==== Reserved IP ====

Surveillance Station connects to the device by IP. The doorbell should be given a reserved IP in the DHCP server. 

* '''TP-Link router admin''' > '''Advanced''' tab > '''DHCP''' > '''Address Reservation''' 
* '''Add New...''' button
** Enter Mac address of doorbell
** Enter IP of doorbell

After saving changes, a reboot of the wifi router is required. Before rebooting, take the SD-M5 doorbell off the network (i.e. unplug the ethernet cable from the PoE injector). 

Reboot the wifi router.

Reconnect the SD-M5 doorbell to the LAN and power. Wait for the harsh beeping sound from the doorbell. 

Confirm the doorbell's IP address in the TP-Link admin under "wired clients."

==== Enable RTSP on doorbell ====

* Connect to doorbell through the Yoosee mobile app. 
* Open the doorbell device.
* Click the gear icon to open the device settings.
* '''Network''' > '''NVR connection''' 
** '''Enable to connect''' > toggle on
** Create a password. This password will be used in Surveillance Station.

==== Confirming the RTSP stream ====

At this point the RTSP stream should be available on the LAN.

Confirm with VLC. '''File''' > '''Open Network''' (<kbd>&#8984;</kbd>+<kbd>N</kbd>)

Enter URL of doorbell RTSP stream: `rtsp://admin:[PASSWORD]@[DOORBELL_IP]:554/onvif1`

VLC should open the live view from the doorbell.

==== Adding camera to Surveillance Station ====

* Use the Surveillance Station url `[DSM Root URL]/webman/3rdparty/SurveillanceStation/`
* ''Or'' '''Synology DSM''' > '''Package Center''' > '''Surveillance Station''' > '''Open''' button
** '''Add Camera...'''
*** '''Name:''' `front door`
*** '''IP:''' `''[dedicated IP of camera]''`
*** '''Port:''' `5000`
*** '''Brand:''' `[ONVIF]`
*** '''User:''' `admin`
*** '''Password:''' `[password set in Yoosee app]`
*** Click '''Test Connection''' button to confirm that Surveillance Station can connect to the doorbell. Video and audio format will be filled in automatically if the test is successful.
*** Click the '''Next''' button to save the camera configuration. 
*** Click the '''Finish''' button on the next dialog to finish configuration.