Editing Adding A 2nd Wireless Router To A LAN (section)

=== Configuring the router ===
# Change the SSID and password to match the main wireless router. 
# Change the following '''Wireless Settings''' to match the main wireless router:<br />'''Wireless Settings''' > '''Wireless Basic Settings'''
## Network Mode 
## Channel
## Extension Channel
# Change the following '''Wireless Security''' settings to match the main wireless router:<br />'''Wireless Settings''' > '''Wireless Security'''
## Security Mode
## Passphrase
# Change the router's IP<br />'''Advanced Settings''' > '''LAN Settings'''
## Change it to any available address on the main router, e.g. 192.168.123.122
## Save and the router will reboot.
# Plug the 2nd wireless router into the LAN. 
## Ethernet cable to one of the 4 LAN ports on the router, not the WAN port.
## When connecting to the router through the web interface an error message will appear stating that there is no ethernet cable connected to the router's WAN port. It's safe to ignore this message.
## At this point devices should be able to connect to the wireless through the 2nd router. 
# Disable DHCP<br />''Remember it's necessary to reconnect to the router's web interface at this point using the new IP address.''
## '''DHCP Server''' > '''DHCP Server''' > '''Enable''' > uncheck