Editing Yoosee SD-M5 (section)

=== Synology Surveillance Station ===

==== Reserved IP ====

Surveillance Station connects to the device by IP. The doorbell should be given a reserved IP in the DHCP server. 

* '''TP-Link router admin''' > '''Advanced''' tab > '''DHCP''' > '''Address Reservation''' 
* '''Add New...''' button
** Enter Mac address of doorbell
** Enter IP of doorbell

After saving changes, a reboot of the wifi router is required. Before rebooting, take the SD-M5 doorbell off the network (i.e. unplug the ethernet cable from the PoE injector). 

Reboot the wifi router.

Reconnect the SD-M5 doorbell to the LAN and power. Wait for the harsh beeping sound from the doorbell. 

Confirm the doorbell's IP address in the TP-Link admin under "wired clients."

==== Enable RTSP on doorbell ====

* Connect to doorbell through the Yoosee mobile app. 
* Open the doorbell device.
* Click the gear icon to open the device settings.
* '''Network''' > '''NVR connection''' 
** '''Enable to connect''' > toggle on
** Create a password. This password will be used in Surveillance Station.

==== Confirming the RTSP stream ====

At this point the RTSP stream should be available on the LAN.

Confirm with VLC. '''File''' > '''Open Network''' (<kbd>&#8984;</kbd>+<kbd>N</kbd>)

Enter URL of doorbell RTSP stream: `rtsp://admin:[PASSWORD]@[DOORBELL_IP]:554/onvif1`

VLC should open the live view from the doorbell.

==== Adding camera to Surveillance Station ====

* Use the Surveillance Station url `[DSM Root URL]/webman/3rdparty/SurveillanceStation/`
* ''Or'' '''Synology DSM''' > '''Package Center''' > '''Surveillance Station''' > '''Open''' button
** '''Add Camera...'''
*** '''Name:''' `front door`
*** '''IP:''' `''[dedicated IP of camera]''`
*** '''Port:''' `5000`
*** '''Brand:''' `[ONVIF]`
*** '''User:''' `admin`
*** '''Password:''' `[password set in Yoosee app]`
*** Click '''Test Connection''' button to confirm that Surveillance Station can connect to the doorbell. Video and audio format will be filled in automatically if the test is successful.
*** Click the '''Next''' button to save the camera configuration. 
*** Click the '''Finish''' button on the next dialog to finish configuration.