Editing WIFI Doorbell Camera Push Notifications

== Overview ==

* Camera: '''[[Yoosee_SD-M5|Yoosee SD-M5]]'''
* Software: '''Synology Surveillance Station'''
* iOS/Android app: '''DS Cam''', '''DS Finder'''

== Install DS Finder app ==

<div class="alert alert-warning">I'm not 100% sure this is necessary. This app allows management of the DSM itself.</div>

* Install and open '''DS Finder'''
* '''Notifications''': On

== DS Cam app configuration ==

* Log into '''Surveillance Station'''
* Click '''Main Menu''' (the icon with the four blocks at the upper left of the page) 

=== Notifications panel ===

* '''Push Service''' tab
** '''Enable mobile device notifications''': checked
** Click '''Manage paired DS Cam''' and confirm that the expected phones are displayed.
** Click '''Manage paired DS Finder''' and confirm that the expected phone are displayed.
** Click '''Send test message''' to confirm that the phones are paired and able to receive notifications from '''Surveillance Station'''.
* '''Rules''' tab
** Make sure the relevant events are checked under the '''Mobile''' column, e.g. '''Camera > Motion Detected''', '''Camera > Intercom - Doorbell event detected'''
* '''Advanced''' tab
** Not sure if these settings are critical to receiving push notifications or not. 
** '''DSM Notification''' > '''Show DSM Notifications...''': checked
** '''Mobile Notifications''' > '''Notifications for non-admin users''': Camera and device events only

=== Home Mode panel ===

'''Home Mode''' controls notifications being issued depending on a mobile device's location. 

* '''Overview'''
** '''Status''': On
** Click '''Show Map''' to confirm the location and size of the geofence.
** Click '''Set Location''' if necessary.
* '''Settings'''
** '''Notification''' tab
*** Click the relevant events in the '''Mobile''' column, e.g. '''Motion detection'''.

=== Doorbell events ===

Doorbell events are not captured when using [ONVIF] as the brand in Surveillance Station.

=== Motion detection ===

* '''Surveillance Station''' > '''IP Camera''' > ''(choose camera)'' > '''Edit''' > '''Event Detection'''

== Yoosee mobile app ==

This app allows doorbell event notifications and intercom functions, but it requires a connection to remote servers through the wifi router. The app is also loaded with advertising. 

After uninstalling the app, it does not seem possible to add the device again. There are 4 options: Scan QR code, add device manually, smart addition, and wired connection.

* There is no QR code on the camera to scan.
* "Add device manually" assumes the camera is connected to the LAN via WIFI, not wired.
* "Smart addition" also assumes the connection is over WIFI.
* "Wired connection" requires a password for the camera. I don't have a record of a password if I ever entered one for the camera. There is no default password printed on the camera or the package that it came in.